毕业设计说明书（论文)中文摘要彩色防滑路面是一种树脂基路面防滑技术，在降低交通事故率、美化环境方面起着重要作用。它是利用一种特殊配方的树脂基胶粘剂和多种不同颜色、规格的集料，混合摊铺在原有的沥青路面上或水泥路面上。本文主要通过彩色防滑路面高低温性能差导致路面病害调查与传热理论分析，选择两组纳米改性双组分材料制备不同主剂与固化剂配合比条件下的对比分析，对比高温、低温、多次冻融循环作用后胶体温度稳定性，分析评价温度稳定性好的纳米改性双组分材料与最佳组分配比。关键词：彩色防滑路面，纳米改性双组分材料，高温稳定性，低温抗裂性毕业设计说明书（论文）外文摘要Title Study on Gradation Design of Porous Asphalt Mixture and TestAbstractColor non-slip road surface is a kind of resin-based road surface non-slip technology,which plays an important role in reducing traffic accident rate and beautifying theenvironment.It uses a specially formulated resin-based adhesive and a variety ofdifferent colors,specifications of aggregates,mixed spread on the original asphaltpavement or cement pavement.This paper mainly analyzes pavement disease investigation and heat transfer theorythrough the poor high and low temperature performance of the color anti-slippavement,selects two sets of nano-modified bi-component materials to preparecomparative analysis of different main agents and curing agent ratios,and compareshigh temperature and low temperature.After repeated freezing and thawing cycles,thetemperature stability of the colloids was evaluated,and the temperature-stablenano-modified bicomponent materials were compared with the optimal groupdistribution ratio.Keywords Color anti-slip pavement,Nano-modified bicomponent materials,Hightemperature stability,Low temperature crack resistance目录11.1问题的提出与研究意义1.3研究的主要内容及技术路线32彩色防滑路面高低温性能差导致路面病害调查·3PMMA的制备及改性3.1MA的预聚合方法53.2MA预聚合实验总结3.3聚合物与颜料的融合93.4聚合物的改性及固化113.5本章小结...124高温稳定性检测方法124.1最佳检测方法.....124.2实验室检测方法13145低温抗裂性检测方法15155.2冻融前材料力学性能测试175.3冻融后材料力学性能测试195.4本章小结.…23结论…27